Westboro Photonics is a leading international provider of LED, display and light measurement metrology equipment with more than 20 years’ experience. Based in Ottawa, Ontario, Westboro Photonics designs, engineers and manufactures instrumentation to measure and characterize light emission, reflection and transmission. Our true strength lies in the creative minds of our engineers and scientists, and in their efforts to research and develop new products and services.
• Integrating Spheres & Components
Allows users to build their own solution with a variety of integrating sphere assemblies and components.
• Light Measurement Systems
Integrating Sphere-based systems developed for an array of spectral applications in a wide range of sizes.
• Luminance/Radiance Systems
Provides uniform radiance or irradiance for the test and calibration of sensor or imaging systems.
• Reflectance Standards & Targets
High-quality reflectance targets and standards for numerous laboratory and field applications.
• Reflectance Materials & Coatings
Propriety reflectance materials and coatings for use in the ultraviolet, visual and infrared regions.
• Instruments
Complete solutions for specific integrating sphere-based products.
• Software
Software solutions for specific integrating sphere-based products.
LiDAR Test Target Kits
Large area dark, grey, and white reference targets are ideal for accurately assessing short-range and long-range sensitivity
over the dynamic range of LiDAR systems. Labsphere's standard LiDAR Test Target Kits include three reflectance levels: 10%, 50% and 80%, a robust case that holds all three Permaflect targets for storage and transport, and spectral reflectance and uniformity test reports.
Value
Customised Uniform Light Sources
We welcome enquiries for modified standard products. We have also worked on some of the most advanced uniform light sources which can be tailored to provide high brightness, large area, defined spectral power distributions, vacuum compatibility and ultra-high uniformity. Whatever your needs, you'll find Pro-Lite and Labsphere able to help.
Large Area Uniform Light Sources
The Labsphere USS-4000 and USS-6500 provide lit areas of 14 and 22 inches respectively which is normally sufficient for the ground calibration of even the widest field of view, satellite-based remote sensing spectroradiometers. Luminance is adjustable either step-wise or continuously from zero to 40,000 cd/m2 or 34,400 cd/m2 respectively.
Low Light Level Uniform Source
The Labsphere USS-1200V-LL is a specialist, very low light level uniform light source that provides for spectral irradiance levels equivalent to an m=0 star in the UV, VIS & NIR bands. With a lit area of 4 inches and light levels precisely adjustable over 8 decades within 7 spectral bands, the USS-1200V-LL is perfect for calibrating optical sensors.
Medium Area Uniform Light Sources
The Labsphere USS-1200 and USS-2000 are medium area uniform light sources with lit areas of 4 and 8 inches respectively. Each sphere is equipped with a combination of four internal and external tungsten halogen lamps to provide step-wise or continuous luminance adjustment from zero to 40,000 cd/m2. The external lamps couple through motorised variable attenuators.
Modular, Small Area Uniform Light Sources
The Labshere USS-800C and USS-800S are a family of modular, small area uniform light sources. The 8 inch sphere features an exit port of 2 inch diameter. Choose from internal lamps of 5, 35 or 75 Watts, or external lamps of 35, 75 or 100 Watts to give fixed or adjustable luminance of up to 70,500 cd/m2. The external lamps couple through a micrometer adjusted variable attenuator.
Small Area Uniform Light Sources
The Labsphere USS-600 series are 6 inch uniform light sources with 2 inch exit ports providing luminance which is adjustable from zero to 2,800 cd/m2. The USS-600 comes with either a manual iris or motorised variable attenuator for setting the desired luminance level. A 35 Watt internal lamp housed in a 3 inch satellite sphere helps to ensure exceptional luminance uniformity.
Solar Spectrum Uniform Lights Sources
The Labsphere XTH-1200 and XTH-2000 are uniform light sources that seamlessly combine the output of an incandescent lamp with a xenon discharge source to boost the sphere's output in the blue part of the spectrum which matches the spectral power of the ASTM D65 standard daylight illuminant. Exit port sizes are 4 and 8 inches respectively, brightness is adjustable up to 20,500 cd/m2.
SPECTRAL EVOLUTION manufactures state of the art UV-VIS-NIR-SWIR full range spectroradiometers, spectrophotometers and spectrometer systems for laboratory or handheld portable use. The systems are used worldwide in analytical, environmental, industrial and medical diagnostics markets.
Field portable full range remote sensing and mining spectrometers and spectroradiometers:
• Selectable foreoptics: lens, fiber optic, diffuser or integrating sphere
• 350-2500nm, 350-1900nm, or 320-1100nm range
• Available as a spectroradiometer for spectral radiance and irradiance measurements- factory
calibrated with NIST-traceable reference standards
• Typical Applications- Ground truthing, solar radiometry, environmental measurement, remote sensing & research, forestry, mineral reflectance.
Field portable full range remote sensing and mining spectrometers and spectroradiometers:
• Selectable foreoptics: lens, fiber optic, diffuser or integrating sphere
• 350-2500nm, 350-1900nm, or 320-1100nm range
• Available as a spectroradiometer for spectral radiance and irradiance measurements- factory
calibrated with NIST-traceable reference standards
• Typical Applications- Ground truthing, solar radiometry, environmental measurement, remote sensing & research, forestry, mineral reflectance.
Full range UV-VIS-NIR lab spectrometers
• 350-2500nm, 350-1900nm, 300-1700nm, 320-1100nm and 380-780nm UV-VIS-NIR Spectrometer ranges
• Integral dark shutters & automatic exposure control for fast,one-touch
• operation.
• Wireless Bluetooth operation
• Diffraction grating based optics with no moving parts- can be mounted in any orientation for trouble free operation.
• Typical Applications: reflectance, transflectance, transmittance and spectral wavelength measurements
LF series near-infrared (NIR) spectrometers:
Short Wave Infrared (SWIR) spectrometers - Short Wave IR Spectrometers
• 900-1700nm; 512 channel InGaAs array (LF-1250)
• 1100-2100nm; 256 channel extended InGaAs array (LF-2100)
• 1000-2500nm; 256 channel extended InGaAs array (LF-2500)
• 1850-2500nm; 256 channel extended InGaAs array (LF-2300)
• High speed update rate available for on-line process monitoring
• Fiber optic or fixed lens spectrometer configurations available
• USB and wireless Bluetooth communication
• Typical Applications: Laser measurements, moisture analysis, analyte detection
Full range laboratory spectroradiometers:
• Selectable foreoptics: fiber optic lens, diffuser, or integrating sphere
• 350-2500nm, 350-1900nm, 300-1700nm or 320-1100nm range
• Ideal for spectral radiance and irradiance measurements- calibrated with NIST-traceable reference standards
• Typical Applications- Environmental monitoring stations, lab measurement, spectral match of solar-simulators and LEDs, calibration transfer
The LASOS® DPSS laser series is the best choice when reliability and long lifetime matters.
The special optical design and an intelligent power and temperature Control Guarantee:
- Excellent long-term stability
- Low noise
- Exceptional good beam quality
- Long lifetime
Standard and customized models are available in a large variety in the spectral range red, green and yellow with output powers between 0.5 and 35 mW. Options are single mode or multimode output, random or linear polarization and Brewster window tubes for educational and scientific purposes.
For photo printing applications in the AGFA d-lab.2 and d-lab.3 printers, A dual line laser with emission at 454/ 458 nm and 514 nm has been developed, showing an excellent beam quality, beam pointing stability and long-term stability with low-noise operation.
The customers can choose from a variety of standard cables that are usually available from stock or can build a customized cable.
Sandvic Components manufactures wide range of products in the field of Optics, Opto mechanics, Optical instruments etc. which we cater to research
organisations and educational institutes world wide. The Products provide an economic solution with unmatched pricision and quality. Please go through the following links to view our products. We welcome custom enquiries as well.
Breadboards, Tabletops, Rails & Platforms :
Sandvic Components manufactures a wide range of solid breadboards; honeycomb breadboards, workstations, and optical tables. Table and breadboard offering rigid, passive, or active vibration damping options are available. Several damping, skin thicknesses and material choices as well as active vibration isolation systems ensure that the most appropriate product can be designed and created for your
General Purpose Light Sources:
Basic Simulator, 150W
Photobiology Simulator, 150W
Photobiology Simulator, 300W
Photobiology Simulator, 1000W
UVB Simulator
OZ Optics broad product line addresses technical challenges related to polarization, power equalization, laser-to-fiber delivery, and test and
measurement in newer high-speed, optical networking systems. As a result, our products enable our customers to develop optical networking systems that transmit data reliably at increasing data rates.
Optical Surfaces Limited is a UK based company supplying the world with optical components and instruments. Over the last 50 years – Optical Surfaces Ltd has established itself as a leading international manufacturer of top quality, high precision optical components and systems.
We have contributed to many major projects worldwide involved in areas such as: • fundamental physics • astronomy • space • defence and the environment.
Products :-
• Off-axis Paraboloids
• On-axis Paraboloids
• Ellipsoids
• Hyperboloids
• Aspheric Lenses
• Toroids
• Flats
• Windows
• Etalons
• Spherical Mirrors
• Lenses
• Prisms
• Beam Splitters
• Filters and Fibres
• Reflective Collimators
• Laser Beam Expanders
• Mounts/Mounted Optics
• Custom Systems & Optics
Helioworks Inc., Premier Manufacturer of Specialized Infrared Lamps and Creator of Innovative IR Sources and Infrared Emitters. Our products include PULSABLE sources utilizing tungsten and Nichrome (NiCr) and STEADY STATE sources utilizing Kanthal and NiCr filaments.
All are constructed in industry standard TO-8 sized packages with gold plated parabolic reflectors to enhance output in the near infrared. Additional products are being developed. We welcome your requests with specialized requirements to meet your needs.
greenTEG develops solutions for applications in heat flux sensing, energy harvesting, and waste heat recovery. greenTEG develops, manufactures and markets Heat Flux and Laser Power Sensors (gSKIN®) as well as
Thermoelectric Generators (gTEG®).
greenTEG develops,manufactures and markets Heat Flux and Laser Power Sensors (gSKIN®) as well as Thermoelectric Generators (gTEG®). gSKIN®s measure thermal flows (conductive, radiative, convective) fast and with highest precision. gTEG®s harvest emission-free electricity from temperature differences for autonomous power supply. Laser power measurement with an easy-to-use, fast, and small thermopile sensor. Click here more information.
gSKIN®s measure thermal flows (conductive, radiative, convective) fast and with highest precision. gTEG®s harvest emission-free electricity from temperature differences for autonomous power supply. Laser power measurement with an easy-to-use, fast, and small thermopile sensor .
GreenTEG develops solutions for applications in heat flux sensing, energy harvesting, and waste heat recovery.
.
Photonics Marketing Company
Unit no. F-132,Dreams The Mall, Bhandup West, Mumbai-78, Maharashtra, India. . Email : For Service and Technical Support : pmc@photonics-marketing.com For Sales/ Marketing / other support : info@photonics-marketing.com
Copyright © 2020 Photonics Marketing Company - All Rights Reserved.